| | |
 | Challenge Pro Seat
Challenge Pro Seat is Homologated to F.I.A. 8855-1999 and suitable for International
events.
Our most popular seat size, to fit Mr Normal, (10.5 Stones-13.5 Stones /
65kg-85kg)
StandardGRP Fibreglass Shell Construction....
Leather Shoulder Protection
Side mounted, 5 Harness Slots, Removable Cushions
BLACK & Red only, pluss One Size..
Alternative seats can include..
| GRP |
Fibreglass |
| Composite |
Fibreglass with
CarbonFibre Strengtheners |
| Hybrid |
Shell made of KEVLAR®
brand fiber Carbon |
| Carbon |
Carbon |
Embroidery:
Name on Seat £5.00
Your Company Logo - On Request.
And a factory fitting service for outsize reqayerments. All above priced
on application.
A range of subframes are available, please see our accessories
page for further details.
|
| |
| Challenge Sumpguards
Dural sump guard 6mm thick inc. fitting bar.
Price: £195.00 (Excluding: VAT at 17.5%)
|  |
| |
|  | Challenge Tankguard - Steel
Steel 2mm
Price: £95.00 (Excluding: VAT at 17.5%)
|
| |
| Challenge Tankguard - Alloy
Alloy 3mm
Price: £110.00 (Excluding: VAT at 17.5%)
|  |
| |
| | | Challenge Pro-Jet Helmet
Open face helmet that is supplied with a black anti-dazzle peak and lined in a flame resistant red Nomex. BS6658-85 A/FR Approved. Sizes: S, M, L or XL (55 to 62cms).
Price: £152.00 (Excluding: VAT at 17.5%)
|
| |
| Challenge Pro-rally Helmet
Pro Rally open face helmet fitted with Peltor intercom and noise reducer ear pads, as used by the World's leading rally drivers and co-drivers. Flame resistant Nomex lining. Provided with black anti-dazzle peak. BS6659-85 A/FR Approved. Sizes: S, M, L or XL (55 to 62cms). Colour: White helmet with black peak.
Price: £320.00 (Excluding: VAT at 17.5%)
| |
| |
|  | Challenge First Aid Kit
Full of all the necessary first aid equipment you would require in an emergency situation. EC approved.
Price: £15.00 (Excluding: VAT at 17.5%)
|
| |
| Challenge Master Battery Cut off Switch
Prevents alternator diode damage and prevents engine run on when battery supply switched off. Suitable for 6,12 and 24v, rated at 100 amp continuous. Supplied with resistor and ignition decal.
Price: £35.00 (Excluding: VAT at 17.5%)
|  |
| |
|  | Challenge Six Point Bolt in Competition Cage
Made from Cold Drawn Seamless tubing (CDS),this six point competition cage is the finest in the world, made to the most exacting standards. Structures provide maximum compressive strength with the minimum possible bends so avoiding the weaknesses in sharp bends. Most cages are homologated and as such are not rendered illegal by the rule changes which affect cages manufactured without certification. Only FIA/ASN approved manufacturers may submit roll cage designs for homologation.
|
| |
| Challenge Multi Point Competition Cage
The ultimate bolt-in cage. The complete roll cage structure integrates with the inherent strength of the body shell for which it has been designed whilst at the same time compensating for its weaknesses. It is pinned by high tensile bolts to welded mountings on the screen pillar, screen rail, door pillars and cant rails in addition to the normal base mounts. Where necessary, front triangulation members are incorporated and the back stays arranged to transfer abnormal suspension shock loadings into the roll cage, thereby improving handling and increasing the life of the shell.
|  |
| |
| | | Challenge Weld in Cage
The ultimate roll cage. Full integral weld-in cages are used by professional and works teams. Weight saving can be achieved by using sophisticated steel alloys such as aircraft quality T45. The quality of the installation is critical in a weld-in cage, so the installer must be known to the 205 Challenge.
|
| |
| Challenge 6 Point Harness
NEW PRO Seat BeltA top quality harness using 75mm shoulder straps and 50mm lap straps. Employs immensely strong aircraft-type quick release buckle. Machined from a solid piece of aerospace aluminium with stainless steel internal parts, this is the finest buckle you can buy. Available as 4, 5 or 6 point to fit all standard saloon cars, comes complete with eye bolts and in seven colours. FIA homologated.
Price: £117.00 (Excluding: VAT at 17.5%)
| |
| |
|  | Challenge Roll Bar Padding
Roll bar padding in 2 specifications, polyurethane or Confor-foam. The moulded black polyurethane is in 920mm lengths and can be cut into 230mm sections. The Confor-foam is high impact, rate responsive foam as used in Formula One. In 600mm lengths.£25.00 plus VAT for 915mm length.
Price: £25.00 (Excluding: VAT at 17.5%)
|
| |
| Challenge Seat Frames
Two piece 5mm thick aluminium seat frames.
Price: £38.00 (Excluding: VAT at 17.5%)
|  |
| |